In this report we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and tricks which you can use.

For those who have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other regions of the house, you will need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the setup that will look a little scary at first, but it is really very simple. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape from dog face mask the cardboard, so you will need to cut around the edge of the mask so that you get something which looks like a cone. The most important thing here is to be realistic with what type of paper plate which you’re using.

Then you will have to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so that you can ensure that nothing will leak when you put the mask on. Be sure the edges are cut so that the edges are not sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask first, so that you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.

Don’t fret too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it will leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint after you’re done, so that you don’t end up with smudges or smears on your dog.

Then it’s time to glue the mask onto your dog’s head. First you will need to be certain that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it is secure, then you may start to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the base of the mask and fold it over. Be certain it’s quite strong and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you’ve got the mask snugged firmly onto the face of your dog. Do not make the folds too large or else it could look messy. Once you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask on the dog. Make certain the ears are flat and be certain it’s not too short or long as this can cause some problems with the mask slipping off the dog’s face.

If you are using a dog mask as your dog protection, you will have to do some sanding to be sure that it’s safe on your dog. You can accomplish it by sanding off any excess paper that may have been removed from your mask.